Updated Unleash the Power of Time FCPX Freeze Frames and Slow Motion Tutorials for 2024

Morgan Lv12

2024-04-28 05:38:20 2024-04-28 05:38:20 Created 2024-04-29 05:38:20 2024-04-29 05:38:20 Updated

ai
>
video

Unleash the Power of Time: FCPX Freeze Frames and Slow Motion Tutorials

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Bonus: Stabilize shaky videos using Filmora video editor

Filmora video editor is a powerful video stabilizing software filled with powerful editing features. Unlike other editing software, Filmora is compatible with both Windows and Mac.

Some of the above video stabilizers are complex and require expertise. On the other hand, Wondershare Filmora video editor provides you with an easy-to-use interface and easy navigation options.

Key features:

Modern and intuitive interface.
Video stabilization in one click.
Powerful edition features.
Rich effects and templates.

Steps to stabilize videos using Wondershare Filmora video editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Drag shaky videos into the Filmora video editor timeline.

Step 2: Click on the edit option in the toolbar to access the editing panel.

Step 3: Select the stabilization option from the editing panel.

Step 4: Click the play button to preview the stabilized video clip. It also allows you to stabilize the smooth level to obtain better results.

Conclusion

Videos are the most popular types of content. They instantly convey the message and engage the consumers. However, the quality of your video is crucial from your business perspective. Video stabilizing software provides stability to videos and makes them look professional and smooth.

Even if you don’t use video stabilizers for stabilizing videos for your business purposes, they can still come in handy while stabilizing your private videos.

Steps to stabilize shaky clips on iMovie

Step 1: Import the video you want to stabilize into the iMovie application on Mac computer;

Step 2: In the adjustment tab, click on the Stabilization button and turn on Stabilize Shaky Video tool.

Step 3: To adjust the amount of stabilization, click and drag the stabilize shaky video slider.

2. Windows movie maker

Key features:

It enables you to add special effects to your videos.
Options for extensive audio track selection.
Timeline narration options.

If you are using Windows 7, you are lucky to use Windows Movie Maker to stabilize the shaky videos easily. Watch the video tutorial to find out how.

Steps to stabilize shaky clips on Windows Movie Maker

Step 1: Open the app and click on the Add videos and photos icon, and select the video clip you want to stabilize.

Step 2: Select the portion of the clip that you want to stabilize. You can do this by selecting the shaky video selection option on the right side of the software’s windows.

Step 3: Click on the Edit tab to access the Video stabilization feature.

3. HitFilm express

Key features:-

Advance tracking
Lighting effects
Muzzle flash effects
Masking and layering technique
Screen simulation

Steps to stabilize shaky clips on HitFilm Express

Step 1: Import the clip you want to stabilize and navigate to the control panel.

Step 2: Under the control panel menu, select the track option, and locate your tracking points.

Step 3: It will provide you with two options under the type menu, Single-point position only and double-point position scale/rotation. Select the most appropriate option.

Step 4: Under the purpose-tab, select stabilize options and hit apply.

4. FilmForth

You can edit video, add filters and transitions, titles, record voiceover, or add background music to video. What’s more, it allows you to save the video without watermark.

Key features:-

Slideshow maker with photos, videos, music, and effects;
Change the video background or make the logo transparent;

Steps to stabilize videos using FilmForth

Step 1: Select the stabilize video option under the quick tool menu.

Step 2: Select the video file that you want to stabilize.

Step 3: Manually fill the video resolution, video quality, and frame rate settings.

Step 4: Give the file an output name, and choose the video to save the video file.

5. Video DeShake

Steps to stabilize videos using video Deshake:

Step 1: Download and install video Deshake software from av2video.com.

Step 2: Select the plus icon from the left-aligned menu bar.

Step 3: Select the video file that you want to stabilize.

Step 4: Select your preferred format for the output video, and click on the stabilize option present at the bottom of the interface.

6. Shotcut

Key features:-

It can load videos recorded in high resolution or above 60 fps.
Single frame image extraction options.
Video stabilization feature
Blurring effect

Steps to stabilize videos using Shotcut:-

Step 1: Drag the video file you want to stabilize into the software interface. Select the timeline feature to select the portion of the video clip that you want to stabilize.

Step 2: Select the filter tab and follow by selecting the plus button. Under the plus icon, select the monitor option and find the stabilize option under the menu.

7. Blender

Key features:-

Live preview, chroma vectorscope, and histogram displays.
Scrubbing and waveform visualization.
Audion mixing and syncing.
Speed control, adjustment layers, transitions, and keyframe options.

Steps to stabilize videos using Blender

Step 1: Begin by going to the motion tracking workspace.

Step 2: Click on open and select the video file you want to stabilize.

Step 3: Select the tracking option from the toolbar and click on the movie to set tracking points.

Step 4: Set the tracking point size and press the right arrow to start tracking.

Step 5: Select the file menu and navigate the save option to save the stabilized video.

8. AVS video stabilizer

Key features:-

Audio capture
Brand overlay
Customizable templates
Easy to use interface with drag and drop features
Multimedia format support

Steps to stabilize videos using AVS video editor:

Step 1: Click on the import option under the media library tab and import the video you want to stabilize.

Step 2: Press the video stabilization button present over the timeline.

Step 3: Under the stabilization video, drag the compensation bar to adjust the degree of stabilization.

Step 4: Click on the ok button at the bottom of the stabilization menu to save the changes.

9. VSDC

Key features:-

Side by side and split-screen videos
Videos in the text effects
Green screen removal
Double exposure

Steps to stabilize videos using VSDC

Step 1: Open the VSDC video editor, and navigate to the video stabilization feature from the Tools tab.

Step2: Select the open file option and export the video file you want to stabilize.

Step 3: In the stabilization, tab adjust the settings that best suit your specific requirements.

Step 4: Complete the process by clicking on the export project to view the outcome.

10. Openshot

Key features:-

Compatible with multiple operating systems (Linux, Mac, and Windows)
It supports a handful of video audio and image formats.
Video transition along with the real-time preview.
Options for creating title and sub-title creation
Titles formation with 3D animation

Steps to stabilize videos using Openshot

Step 1: Open the video you want to stabilize using the project file tab.

Step 2: Drag the video timeline tab and locate the shaky part of the video you want to stabilize.

Step 3: Select the effects tab and navigate the stabilizer feature from the menu.

Step 4: Drag the stabilizer feature to your video clip in the timeline.

Step 5: You will see the stabilizer: initialize effect window. Select the degree of percentage as per your specific requirements.

Step 6: Select the process effects option.

Bonus: Stabilize shaky videos using Filmora video editor

Filmora video editor is a powerful video stabilizing software filled with powerful editing features. Unlike other editing software, Filmora is compatible with both Windows and Mac.

Some of the above video stabilizers are complex and require expertise. On the other hand, Wondershare Filmora video editor provides you with an easy-to-use interface and easy navigation options.

Key features:

Modern and intuitive interface.
Video stabilization in one click.
Powerful edition features.
Rich effects and templates.

Steps to stabilize videos using Wondershare Filmora video editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Drag shaky videos into the Filmora video editor timeline.

Step 2: Click on the edit option in the toolbar to access the editing panel.

Step 3: Select the stabilization option from the editing panel.

Step 4: Click the play button to preview the stabilized video clip. It also allows you to stabilize the smooth level to obtain better results.

Conclusion

Even if you don’t use video stabilizers for stabilizing videos for your business purposes, they can still come in handy while stabilizing your private videos.

Steps to stabilize shaky clips on iMovie

Step 1: Import the video you want to stabilize into the iMovie application on Mac computer;

Step 2: In the adjustment tab, click on the Stabilization button and turn on Stabilize Shaky Video tool.

Step 3: To adjust the amount of stabilization, click and drag the stabilize shaky video slider.

2. Windows movie maker

Key features:

It enables you to add special effects to your videos.
Options for extensive audio track selection.
Timeline narration options.

If you are using Windows 7, you are lucky to use Windows Movie Maker to stabilize the shaky videos easily. Watch the video tutorial to find out how.

Steps to stabilize shaky clips on Windows Movie Maker

Step 1: Open the app and click on the Add videos and photos icon, and select the video clip you want to stabilize.

Step 2: Select the portion of the clip that you want to stabilize. You can do this by selecting the shaky video selection option on the right side of the software’s windows.

Step 3: Click on the Edit tab to access the Video stabilization feature.

3. HitFilm express

Key features:-

Advance tracking
Lighting effects
Muzzle flash effects
Masking and layering technique
Screen simulation

Steps to stabilize shaky clips on HitFilm Express

Step 1: Import the clip you want to stabilize and navigate to the control panel.

Step 2: Under the control panel menu, select the track option, and locate your tracking points.

Step 3: It will provide you with two options under the type menu, Single-point position only and double-point position scale/rotation. Select the most appropriate option.

Step 4: Under the purpose-tab, select stabilize options and hit apply.

4. FilmForth

You can edit video, add filters and transitions, titles, record voiceover, or add background music to video. What’s more, it allows you to save the video without watermark.

Key features:-

Slideshow maker with photos, videos, music, and effects;
Change the video background or make the logo transparent;

Steps to stabilize videos using FilmForth

Step 1: Select the stabilize video option under the quick tool menu.

Step 2: Select the video file that you want to stabilize.

Step 3: Manually fill the video resolution, video quality, and frame rate settings.

Step 4: Give the file an output name, and choose the video to save the video file.

5. Video DeShake

Steps to stabilize videos using video Deshake:

Step 1: Download and install video Deshake software from av2video.com.

Step 2: Select the plus icon from the left-aligned menu bar.

Step 3: Select the video file that you want to stabilize.

Step 4: Select your preferred format for the output video, and click on the stabilize option present at the bottom of the interface.

6. Shotcut

Key features:-

It can load videos recorded in high resolution or above 60 fps.
Single frame image extraction options.
Video stabilization feature
Blurring effect

Steps to stabilize videos using Shotcut:-

Step 1: Drag the video file you want to stabilize into the software interface. Select the timeline feature to select the portion of the video clip that you want to stabilize.

Step 2: Select the filter tab and follow by selecting the plus button. Under the plus icon, select the monitor option and find the stabilize option under the menu.

7. Blender

Key features:-

Live preview, chroma vectorscope, and histogram displays.
Scrubbing and waveform visualization.
Audion mixing and syncing.
Speed control, adjustment layers, transitions, and keyframe options.

Steps to stabilize videos using Blender

Step 1: Begin by going to the motion tracking workspace.

Step 2: Click on open and select the video file you want to stabilize.

Step 3: Select the tracking option from the toolbar and click on the movie to set tracking points.

Step 4: Set the tracking point size and press the right arrow to start tracking.

Step 5: Select the file menu and navigate the save option to save the stabilized video.

8. AVS video stabilizer

Key features:-

Audio capture
Brand overlay
Customizable templates
Easy to use interface with drag and drop features
Multimedia format support

Steps to stabilize videos using AVS video editor:

Step 1: Click on the import option under the media library tab and import the video you want to stabilize.

Step 2: Press the video stabilization button present over the timeline.

Step 3: Under the stabilization video, drag the compensation bar to adjust the degree of stabilization.

Step 4: Click on the ok button at the bottom of the stabilization menu to save the changes.

9. VSDC

Key features:-

Side by side and split-screen videos
Videos in the text effects
Green screen removal
Double exposure

Steps to stabilize videos using VSDC

Step 1: Open the VSDC video editor, and navigate to the video stabilization feature from the Tools tab.

Step2: Select the open file option and export the video file you want to stabilize.

Step 3: In the stabilization, tab adjust the settings that best suit your specific requirements.

Step 4: Complete the process by clicking on the export project to view the outcome.

10. Openshot

Key features:-

Compatible with multiple operating systems (Linux, Mac, and Windows)
It supports a handful of video audio and image formats.
Video transition along with the real-time preview.
Options for creating title and sub-title creation
Titles formation with 3D animation

Steps to stabilize videos using Openshot

Step 1: Open the video you want to stabilize using the project file tab.

Step 2: Drag the video timeline tab and locate the shaky part of the video you want to stabilize.

Step 3: Select the effects tab and navigate the stabilizer feature from the menu.

Step 4: Drag the stabilizer feature to your video clip in the timeline.

Step 5: You will see the stabilizer: initialize effect window. Select the degree of percentage as per your specific requirements.

Step 6: Select the process effects option.

Bonus: Stabilize shaky videos using Filmora video editor

Filmora video editor is a powerful video stabilizing software filled with powerful editing features. Unlike other editing software, Filmora is compatible with both Windows and Mac.

Some of the above video stabilizers are complex and require expertise. On the other hand, Wondershare Filmora video editor provides you with an easy-to-use interface and easy navigation options.

Key features:

Modern and intuitive interface.
Video stabilization in one click.
Powerful edition features.
Rich effects and templates.

Steps to stabilize videos using Wondershare Filmora video editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Drag shaky videos into the Filmora video editor timeline.

Step 2: Click on the edit option in the toolbar to access the editing panel.

Step 3: Select the stabilization option from the editing panel.

Step 4: Click the play button to preview the stabilized video clip. It also allows you to stabilize the smooth level to obtain better results.

Conclusion

Even if you don’t use video stabilizers for stabilizing videos for your business purposes, they can still come in handy while stabilizing your private videos.

Steps to stabilize shaky clips on iMovie

Step 1: Import the video you want to stabilize into the iMovie application on Mac computer;

Step 2: In the adjustment tab, click on the Stabilization button and turn on Stabilize Shaky Video tool.

Step 3: To adjust the amount of stabilization, click and drag the stabilize shaky video slider.

2. Windows movie maker

Key features:

It enables you to add special effects to your videos.
Options for extensive audio track selection.
Timeline narration options.

If you are using Windows 7, you are lucky to use Windows Movie Maker to stabilize the shaky videos easily. Watch the video tutorial to find out how.

Steps to stabilize shaky clips on Windows Movie Maker

Step 1: Open the app and click on the Add videos and photos icon, and select the video clip you want to stabilize.

Step 2: Select the portion of the clip that you want to stabilize. You can do this by selecting the shaky video selection option on the right side of the software’s windows.

Step 3: Click on the Edit tab to access the Video stabilization feature.

3. HitFilm express

Key features:-

Advance tracking
Lighting effects
Muzzle flash effects
Masking and layering technique
Screen simulation

Steps to stabilize shaky clips on HitFilm Express

Step 1: Import the clip you want to stabilize and navigate to the control panel.

Step 2: Under the control panel menu, select the track option, and locate your tracking points.

Step 3: It will provide you with two options under the type menu, Single-point position only and double-point position scale/rotation. Select the most appropriate option.

Step 4: Under the purpose-tab, select stabilize options and hit apply.

4. FilmForth

You can edit video, add filters and transitions, titles, record voiceover, or add background music to video. What’s more, it allows you to save the video without watermark.

Key features:-

Slideshow maker with photos, videos, music, and effects;
Change the video background or make the logo transparent;

Steps to stabilize videos using FilmForth

Step 1: Select the stabilize video option under the quick tool menu.

Step 2: Select the video file that you want to stabilize.

Step 3: Manually fill the video resolution, video quality, and frame rate settings.

Step 4: Give the file an output name, and choose the video to save the video file.

5. Video DeShake

Steps to stabilize videos using video Deshake:

Step 1: Download and install video Deshake software from av2video.com.

Step 2: Select the plus icon from the left-aligned menu bar.

Step 3: Select the video file that you want to stabilize.

Step 4: Select your preferred format for the output video, and click on the stabilize option present at the bottom of the interface.

6. Shotcut

Key features:-

It can load videos recorded in high resolution or above 60 fps.
Single frame image extraction options.
Video stabilization feature
Blurring effect

Steps to stabilize videos using Shotcut:-

Step 1: Drag the video file you want to stabilize into the software interface. Select the timeline feature to select the portion of the video clip that you want to stabilize.

Step 2: Select the filter tab and follow by selecting the plus button. Under the plus icon, select the monitor option and find the stabilize option under the menu.

7. Blender

Key features:-

Live preview, chroma vectorscope, and histogram displays.
Scrubbing and waveform visualization.
Audion mixing and syncing.
Speed control, adjustment layers, transitions, and keyframe options.

Steps to stabilize videos using Blender

Step 1: Begin by going to the motion tracking workspace.

Step 2: Click on open and select the video file you want to stabilize.

Step 3: Select the tracking option from the toolbar and click on the movie to set tracking points.

Step 4: Set the tracking point size and press the right arrow to start tracking.

Step 5: Select the file menu and navigate the save option to save the stabilized video.

8. AVS video stabilizer

Key features:-

Audio capture
Brand overlay
Customizable templates
Easy to use interface with drag and drop features
Multimedia format support

Steps to stabilize videos using AVS video editor:

Step 1: Click on the import option under the media library tab and import the video you want to stabilize.

Step 2: Press the video stabilization button present over the timeline.

Step 3: Under the stabilization video, drag the compensation bar to adjust the degree of stabilization.

Step 4: Click on the ok button at the bottom of the stabilization menu to save the changes.

9. VSDC

Key features:-

Side by side and split-screen videos
Videos in the text effects
Green screen removal
Double exposure

Steps to stabilize videos using VSDC

Step 1: Open the VSDC video editor, and navigate to the video stabilization feature from the Tools tab.

Step2: Select the open file option and export the video file you want to stabilize.

Step 3: In the stabilization, tab adjust the settings that best suit your specific requirements.

Step 4: Complete the process by clicking on the export project to view the outcome.

10. Openshot

Key features:-

Compatible with multiple operating systems (Linux, Mac, and Windows)
It supports a handful of video audio and image formats.
Video transition along with the real-time preview.
Options for creating title and sub-title creation
Titles formation with 3D animation

Steps to stabilize videos using Openshot

Step 1: Open the video you want to stabilize using the project file tab.

Step 2: Drag the video timeline tab and locate the shaky part of the video you want to stabilize.

Step 3: Select the effects tab and navigate the stabilizer feature from the menu.

Step 4: Drag the stabilizer feature to your video clip in the timeline.

Step 5: You will see the stabilizer: initialize effect window. Select the degree of percentage as per your specific requirements.

Step 6: Select the process effects option.

Bonus: Stabilize shaky videos using Filmora video editor

Filmora video editor is a powerful video stabilizing software filled with powerful editing features. Unlike other editing software, Filmora is compatible with both Windows and Mac.

Some of the above video stabilizers are complex and require expertise. On the other hand, Wondershare Filmora video editor provides you with an easy-to-use interface and easy navigation options.

Key features:

Modern and intuitive interface.
Video stabilization in one click.
Powerful edition features.
Rich effects and templates.

Steps to stabilize videos using Wondershare Filmora video editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Drag shaky videos into the Filmora video editor timeline.

Step 2: Click on the edit option in the toolbar to access the editing panel.

Step 3: Select the stabilization option from the editing panel.

Step 4: Click the play button to preview the stabilized video clip. It also allows you to stabilize the smooth level to obtain better results.

Conclusion

Even if you don’t use video stabilizers for stabilizing videos for your business purposes, they can still come in handy while stabilizing your private videos.

Measure and Modify Image Proportionality

You might have noticed that earlier DVDs came with full screen or widescreen viewing choices. Moreover, when you choose the wrong option, it cuts off the movie parts, or the video gets surrounded by black padding.

The standard resolution of your screen stretched from a 4:3 aspect ratio to the wider one. So, producers started making movies that fit on both screens. After the standardization of aspect ratio display, broadcasters pay attention to the image ratio of clips.

So, below is the guide to find, calculate and adjust image ratio with a picture ratio calculator. Let’s get started.

Part 1 What is the image ratio?

The image or aspect ratio is the ratio of width to the height of a picture without any pixels attached. It is expressed with two a colon that separates two numbers, for example, 16:9.

In cinematography, common image ratios are 1.85:1 and 2.39:1, and in TV photography, it is 4:3 and 16:9. However, in still photography, the standard aspect ratio is 3:2.

Part 2 Where Can I Find the Image ratio?

To select the right photo print size, you must consider the photo ratio and the print ratio. You can not accidentally choose the balance that needs cropping from the sides of the photo.

So, first, you must know how or where you can find the image ratio. The following are the methods to do so:

Method 1: Check your Camera

The image ratio depends directly on the camera’s sensor. You can find the correct balance for photo print based on your camera type. For example, APS-C and Full-frame cameras shoot in a 3:2 ratio. But compact cameras often shoot in a 4:3 ratio.

The photos that you click with your smartphones have a 16:9 or 4:3 ratio. The picture below shows some common photo ratios by type of camera and where it will look great in the home.

Method 2: Find Image Information

Unlike the photo ratios, image information determines the original width and height of the image in pixels. You can measure the picture dimensions in any unit, but you will always see the web or digital images in pixels.

Always remember that two different pictures with the same image ratio may not have the same dimensions. For example, a picture with size 1920X1080 pixels and a photo with size 1280x720 pixels can both have a 16:9 aspect ratio.

Method 3: Check with Photoshop

You can quickly check the image ratio in Photoshop (picture ratio calculator) using a crop tool. To do so, follow the steps mentioned below:

● Open the image in Photoshop.

● Choose a crop tool.

● Select the photo ratio.

● Test different image ratios. You can begin with the standard ratios like 3:2, 16:9, 4:3, or 5:4.

● If the crop frame captures the whole picture, it means you have already found the correct ratio.

Do you want a photo print in panorama or square shape? If yes, crop the picture to make it fit a different image ratio. For instance, edit the photo to fit a 1:1 ratio for a square shape.

Or crop a picture to 2:1. 3:1. 4:1, 5:1, or 6:1 ratio for a panorama photo.

Method 4: Image Ratio Calculation

You can find the image ratio using the resolution of a photo easily on a window’s system. To do so, right-click on an image file and scroll down to the Properties. Under details, you will notice, size of a photo in pixels.

To calculate the photo ratio, divide the width by the height of an image. If the total is an integer, multiply it by other numbers. These numbers are photo ratios.

Example 1:

● Photo is 4966px by 3312px

● Divide 4966 by 3312= 1.5

● Now, multiply 1.5 with 2 to obtain a whole number (1.5 X 2= 3)

● The photo’s ratio is 3:2

Example 2:

● Photo is 4416 x 3312 px

● Divide 4416 by 3312= 1.3

● Multiply 1.3 with 3 to obtain a whole number(1.3 x 3= 3.9 or approx. 4)

● The photo’s ratio is 4:3

Part 3 How to adjust image ratio

Image ratio is significant in the videography business. But adjusting the video aspect ratio is more critical. Therefore, if you are a video editor, you must know how to do it. There are plenty of options to adjust the aspect ratio, and one of them is to use a photo aspect ratio calculator.

If you want to make permanent adjustments, use a convertor or editor. “Wondershare Filmora” is the best video editor that allows you to create videos with different aspect ratios and adjust these ratios easily.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

The following are different methods to adjust the aspect ratio in Wondershare Filmora:

Method 1: Adjust Aspect Ratio at the Starting Interface

Wondershare Filmora helps you to adjust the video aspect ratio once you launch the editor program. To begin, go to the “drop-down” menu button. Now, press on it to check some commonly used photo ratios such as 16:9, 1:1, 4:3, 9:16, or 21:9.

Choose the ratio that you want by simply clicking on it.

Method 2: Adjust Aspect Ratio under Project Settings

You can adjust the aspect ratio by clicking on the “Project Settings.” Then, decide the target aspect ratio depending on the aspect ratio of the media source.

For instance, if the aspect ratio of media source files is 4:3, select the standard aspect ratio of 4:3. Then, media files with other aspect ratios will shoe black bars.

So, if any discordance occurs or you want to change the video aspect ratio, select the proper balance from project settings.

Method 3: Adjust Aspect Ratio during Editing

Once you import the videos into the timeline of the Wondershare Filmora, you can easily adjust the ratio from the Crop and Zoom tool.

● Go to timeline and right-click on the video clip. Then, select “Crop and Zoom.” You will see the pop-up window.

● Click on 16:9, 4:3, 1:1, or 9:16 manually at the bottom to change the video aspect ratio.

● You can also manually enter the video aspect ratio. Then, click on the “Ok” button.

Once you make the adjustments in the aspect ratio, add background blur effects if you notice a black bar. It will enhance the video. You can also intensify your video by using filters, visual effects, overlays, or titles.

Method 4: Adjust Video Aspect Ratio with Auto-Reframe

If you use the latest versions of Filmora, you will see Auto Reframe helps adjust the aspect ratio. Other

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The following are steps to change the aspect ratio using the Auto-Reframe option:

Step1

Once you upload the video clips to the media library, right-click on it and select the Auto-Reframe option.

Step2

You will see the Auto Reframe window appear on the screen. Replace the existing video with a new clip. Then, change the video aspect ratio and video motion speed. Make sure to change the aspect ratio that fits most with different social media platforms.

Step3

Once you select the aspect ratio, click on the “Analyze” button. Filmora will Auto-Reframe the video itself. Once the process completes, you can see results in the preview window. Drag box to adjust the frame or to keep the object in it. It will automatically delete the content outside the box.

Step4

After completing adjustment or reframing, click on the “Export” button to save your video.

Change the name of the video and select the location where you want to save the video.

Now, click on the “Export” again to save.

Method 5: Adjust Aspect Ratio at Exporting

You can save the clip to your system or smartphones, depending on your requirements. Then, upload them directly to Youtube or burn them into DVD by clicking on the “Export button.” In this way, you can watch it on widescreen or standard TV whenever you want with an image size aspect ratio calculator.

● Adjust Aspect Ratio for the Local Computer

First, you will see the “Local” tab. There you can save the clip in a particular aspect ratio to your system. You can see all resolutions with various aspect ratios after selecting the format. The output video depends on the media click resolution.

● Adjust Aspect Ratio for a Device

Change the “Device” tab to save the video in formats compatible with popular devices, including iPod, iPhone, PSP, iPad, etc. Choose your favorite or the best resolution. Once you choose the device, you will see all resolutions.

The video quality will continue improving with higher resolutions. But it will also increase the size of the file.

● Adjust Aspect Ratio for YouTube

Go to the “YouTube” tab and fill in the information. Then, click the “Export” button. Selecting the aspect ratio again is not necessary. It will directly upload your videos to YouTube.

● Adjust Aspect Ratio for DVD TV

When you go to the “DVD” tab, you will notice various aspect ratio options. Switching the aspect ratio for TV from 4:3 to 16:9 is pretty straightforward. To do so, select what you think is right. Try to use image size aspect ratio calculator to get the right ratio.

Conclusion

● Aspect ratio holds great importance in the proper display. So, it would be best to learn the calculation and adjustment of the image ratio using photo aspect ratio calculator or image size proportion calculator.

● Hopefully, the above points will help you to learn calculation and adjustment processes. Also, do not forget to use Wondersahe Filmora to set the image ratio and edit the video with ease.

02 [Where Can I Find the Image ratio?](#Part 2)

03 [How to adjust image ratio](#Part 3)

Part 1 What is the image ratio?

The image or aspect ratio is the ratio of width to the height of a picture without any pixels attached. It is expressed with two a colon that separates two numbers, for example, 16:9.

In cinematography, common image ratios are 1.85:1 and 2.39:1, and in TV photography, it is 4:3 and 16:9. However, in still photography, the standard aspect ratio is 3:2.

Part 2 Where Can I Find the Image ratio?

To select the right photo print size, you must consider the photo ratio and the print ratio. You can not accidentally choose the balance that needs cropping from the sides of the photo.

So, first, you must know how or where you can find the image ratio. The following are the methods to do so:

Method 1: Check your Camera

The photos that you click with your smartphones have a 16:9 or 4:3 ratio. The picture below shows some common photo ratios by type of camera and where it will look great in the home.

Method 2: Find Image Information

Method 3: Check with Photoshop

You can quickly check the image ratio in Photoshop (picture ratio calculator) using a crop tool. To do so, follow the steps mentioned below:

● Open the image in Photoshop.

● Choose a crop tool.

● Select the photo ratio.

● Test different image ratios. You can begin with the standard ratios like 3:2, 16:9, 4:3, or 5:4.

● If the crop frame captures the whole picture, it means you have already found the correct ratio.

Do you want a photo print in panorama or square shape? If yes, crop the picture to make it fit a different image ratio. For instance, edit the photo to fit a 1:1 ratio for a square shape.

Or crop a picture to 2:1. 3:1. 4:1, 5:1, or 6:1 ratio for a panorama photo.

Method 4: Image Ratio Calculation

To calculate the photo ratio, divide the width by the height of an image. If the total is an integer, multiply it by other numbers. These numbers are photo ratios.

Example 1:

● Photo is 4966px by 3312px

● Divide 4966 by 3312= 1.5

● Now, multiply 1.5 with 2 to obtain a whole number (1.5 X 2= 3)

● The photo’s ratio is 3:2

Example 2:

● Photo is 4416 x 3312 px

● Divide 4416 by 3312= 1.3

● Multiply 1.3 with 3 to obtain a whole number(1.3 x 3= 3.9 or approx. 4)

● The photo’s ratio is 4:3

Part 3 How to adjust image ratio

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

The following are different methods to adjust the aspect ratio in Wondershare Filmora:

Method 1: Adjust Aspect Ratio at the Starting Interface

Choose the ratio that you want by simply clicking on it.

Method 2: Adjust Aspect Ratio under Project Settings

You can adjust the aspect ratio by clicking on the “Project Settings.” Then, decide the target aspect ratio depending on the aspect ratio of the media source.

For instance, if the aspect ratio of media source files is 4:3, select the standard aspect ratio of 4:3. Then, media files with other aspect ratios will shoe black bars.

So, if any discordance occurs or you want to change the video aspect ratio, select the proper balance from project settings.

Method 3: Adjust Aspect Ratio during Editing

Once you import the videos into the timeline of the Wondershare Filmora, you can easily adjust the ratio from the Crop and Zoom tool.

● Go to timeline and right-click on the video clip. Then, select “Crop and Zoom.” You will see the pop-up window.

● Click on 16:9, 4:3, 1:1, or 9:16 manually at the bottom to change the video aspect ratio.

● You can also manually enter the video aspect ratio. Then, click on the “Ok” button.

Method 4: Adjust Video Aspect Ratio with Auto-Reframe

If you use the latest versions of Filmora, you will see Auto Reframe helps adjust the aspect ratio. Other

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The following are steps to change the aspect ratio using the Auto-Reframe option:

Step1

Once you upload the video clips to the media library, right-click on it and select the Auto-Reframe option.

Step2

Step3

Step4

After completing adjustment or reframing, click on the “Export” button to save your video.

Change the name of the video and select the location where you want to save the video.

Now, click on the “Export” again to save.

Method 5: Adjust Aspect Ratio at Exporting

● Adjust Aspect Ratio for the Local Computer

● Adjust Aspect Ratio for a Device

The video quality will continue improving with higher resolutions. But it will also increase the size of the file.

● Adjust Aspect Ratio for YouTube

Go to the “YouTube” tab and fill in the information. Then, click the “Export” button. Selecting the aspect ratio again is not necessary. It will directly upload your videos to YouTube.

● Adjust Aspect Ratio for DVD TV

Conclusion

● Hopefully, the above points will help you to learn calculation and adjustment processes. Also, do not forget to use Wondersahe Filmora to set the image ratio and edit the video with ease.

02 [Where Can I Find the Image ratio?](#Part 2)

03 [How to adjust image ratio](#Part 3)

Part 1 What is the image ratio?

The image or aspect ratio is the ratio of width to the height of a picture without any pixels attached. It is expressed with two a colon that separates two numbers, for example, 16:9.

In cinematography, common image ratios are 1.85:1 and 2.39:1, and in TV photography, it is 4:3 and 16:9. However, in still photography, the standard aspect ratio is 3:2.

Part 2 Where Can I Find the Image ratio?

To select the right photo print size, you must consider the photo ratio and the print ratio. You can not accidentally choose the balance that needs cropping from the sides of the photo.

So, first, you must know how or where you can find the image ratio. The following are the methods to do so:

Method 1: Check your Camera

The photos that you click with your smartphones have a 16:9 or 4:3 ratio. The picture below shows some common photo ratios by type of camera and where it will look great in the home.

Method 2: Find Image Information

Method 3: Check with Photoshop

You can quickly check the image ratio in Photoshop (picture ratio calculator) using a crop tool. To do so, follow the steps mentioned below:

● Open the image in Photoshop.

● Choose a crop tool.

● Select the photo ratio.

● Test different image ratios. You can begin with the standard ratios like 3:2, 16:9, 4:3, or 5:4.

● If the crop frame captures the whole picture, it means you have already found the correct ratio.

Do you want a photo print in panorama or square shape? If yes, crop the picture to make it fit a different image ratio. For instance, edit the photo to fit a 1:1 ratio for a square shape.

Or crop a picture to 2:1. 3:1. 4:1, 5:1, or 6:1 ratio for a panorama photo.

Method 4: Image Ratio Calculation

To calculate the photo ratio, divide the width by the height of an image. If the total is an integer, multiply it by other numbers. These numbers are photo ratios.

Example 1:

● Photo is 4966px by 3312px

● Divide 4966 by 3312= 1.5

● Now, multiply 1.5 with 2 to obtain a whole number (1.5 X 2= 3)

● The photo’s ratio is 3:2

Example 2:

● Photo is 4416 x 3312 px

● Divide 4416 by 3312= 1.3

● Multiply 1.3 with 3 to obtain a whole number(1.3 x 3= 3.9 or approx. 4)

● The photo’s ratio is 4:3

Part 3 How to adjust image ratio

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

The following are different methods to adjust the aspect ratio in Wondershare Filmora:

Method 1: Adjust Aspect Ratio at the Starting Interface

Choose the ratio that you want by simply clicking on it.

Method 2: Adjust Aspect Ratio under Project Settings

You can adjust the aspect ratio by clicking on the “Project Settings.” Then, decide the target aspect ratio depending on the aspect ratio of the media source.

For instance, if the aspect ratio of media source files is 4:3, select the standard aspect ratio of 4:3. Then, media files with other aspect ratios will shoe black bars.

So, if any discordance occurs or you want to change the video aspect ratio, select the proper balance from project settings.

Method 3: Adjust Aspect Ratio during Editing

Once you import the videos into the timeline of the Wondershare Filmora, you can easily adjust the ratio from the Crop and Zoom tool.

● Go to timeline and right-click on the video clip. Then, select “Crop and Zoom.” You will see the pop-up window.

● Click on 16:9, 4:3, 1:1, or 9:16 manually at the bottom to change the video aspect ratio.

● You can also manually enter the video aspect ratio. Then, click on the “Ok” button.

Method 4: Adjust Video Aspect Ratio with Auto-Reframe

If you use the latest versions of Filmora, you will see Auto Reframe helps adjust the aspect ratio. Other

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The following are steps to change the aspect ratio using the Auto-Reframe option:

Step1

Once you upload the video clips to the media library, right-click on it and select the Auto-Reframe option.

Step2

Step3

Step4

After completing adjustment or reframing, click on the “Export” button to save your video.

Change the name of the video and select the location where you want to save the video.

Now, click on the “Export” again to save.

Method 5: Adjust Aspect Ratio at Exporting

● Adjust Aspect Ratio for the Local Computer

● Adjust Aspect Ratio for a Device

The video quality will continue improving with higher resolutions. But it will also increase the size of the file.

● Adjust Aspect Ratio for YouTube

Go to the “YouTube” tab and fill in the information. Then, click the “Export” button. Selecting the aspect ratio again is not necessary. It will directly upload your videos to YouTube.

● Adjust Aspect Ratio for DVD TV

Conclusion

● Hopefully, the above points will help you to learn calculation and adjustment processes. Also, do not forget to use Wondersahe Filmora to set the image ratio and edit the video with ease.

02 [Where Can I Find the Image ratio?](#Part 2)

03 [How to adjust image ratio](#Part 3)

Part 1 What is the image ratio?

The image or aspect ratio is the ratio of width to the height of a picture without any pixels attached. It is expressed with two a colon that separates two numbers, for example, 16:9.

In cinematography, common image ratios are 1.85:1 and 2.39:1, and in TV photography, it is 4:3 and 16:9. However, in still photography, the standard aspect ratio is 3:2.

Part 2 Where Can I Find the Image ratio?

To select the right photo print size, you must consider the photo ratio and the print ratio. You can not accidentally choose the balance that needs cropping from the sides of the photo.

So, first, you must know how or where you can find the image ratio. The following are the methods to do so:

Method 1: Check your Camera

The photos that you click with your smartphones have a 16:9 or 4:3 ratio. The picture below shows some common photo ratios by type of camera and where it will look great in the home.

Method 2: Find Image Information

Method 3: Check with Photoshop

You can quickly check the image ratio in Photoshop (picture ratio calculator) using a crop tool. To do so, follow the steps mentioned below:

● Open the image in Photoshop.

● Choose a crop tool.

● Select the photo ratio.

● Test different image ratios. You can begin with the standard ratios like 3:2, 16:9, 4:3, or 5:4.

● If the crop frame captures the whole picture, it means you have already found the correct ratio.

Do you want a photo print in panorama or square shape? If yes, crop the picture to make it fit a different image ratio. For instance, edit the photo to fit a 1:1 ratio for a square shape.

Or crop a picture to 2:1. 3:1. 4:1, 5:1, or 6:1 ratio for a panorama photo.

Method 4: Image Ratio Calculation

To calculate the photo ratio, divide the width by the height of an image. If the total is an integer, multiply it by other numbers. These numbers are photo ratios.

Example 1:

● Photo is 4966px by 3312px

● Divide 4966 by 3312= 1.5

● Now, multiply 1.5 with 2 to obtain a whole number (1.5 X 2= 3)

● The photo’s ratio is 3:2

Example 2:

● Photo is 4416 x 3312 px

● Divide 4416 by 3312= 1.3

● Multiply 1.3 with 3 to obtain a whole number(1.3 x 3= 3.9 or approx. 4)

● The photo’s ratio is 4:3

Part 3 How to adjust image ratio

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

The following are different methods to adjust the aspect ratio in Wondershare Filmora:

Method 1: Adjust Aspect Ratio at the Starting Interface

Choose the ratio that you want by simply clicking on it.

Method 2: Adjust Aspect Ratio under Project Settings

You can adjust the aspect ratio by clicking on the “Project Settings.” Then, decide the target aspect ratio depending on the aspect ratio of the media source.

For instance, if the aspect ratio of media source files is 4:3, select the standard aspect ratio of 4:3. Then, media files with other aspect ratios will shoe black bars.

So, if any discordance occurs or you want to change the video aspect ratio, select the proper balance from project settings.

Method 3: Adjust Aspect Ratio during Editing

Once you import the videos into the timeline of the Wondershare Filmora, you can easily adjust the ratio from the Crop and Zoom tool.

● Go to timeline and right-click on the video clip. Then, select “Crop and Zoom.” You will see the pop-up window.

● Click on 16:9, 4:3, 1:1, or 9:16 manually at the bottom to change the video aspect ratio.

● You can also manually enter the video aspect ratio. Then, click on the “Ok” button.

Method 4: Adjust Video Aspect Ratio with Auto-Reframe

If you use the latest versions of Filmora, you will see Auto Reframe helps adjust the aspect ratio. Other

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The following are steps to change the aspect ratio using the Auto-Reframe option:

Step1

Once you upload the video clips to the media library, right-click on it and select the Auto-Reframe option.

Step2

Step3

Step4

After completing adjustment or reframing, click on the “Export” button to save your video.

Change the name of the video and select the location where you want to save the video.

Now, click on the “Export” again to save.

Method 5: Adjust Aspect Ratio at Exporting

● Adjust Aspect Ratio for the Local Computer

● Adjust Aspect Ratio for a Device

The video quality will continue improving with higher resolutions. But it will also increase the size of the file.

● Adjust Aspect Ratio for YouTube

Go to the “YouTube” tab and fill in the information. Then, click the “Export” button. Selecting the aspect ratio again is not necessary. It will directly upload your videos to YouTube.

● Adjust Aspect Ratio for DVD TV

Conclusion

● Hopefully, the above points will help you to learn calculation and adjustment processes. Also, do not forget to use Wondersahe Filmora to set the image ratio and edit the video with ease.

The Top 10 Free GIF Looping Tools You Need

Best Free GIF Loop Makers

Shanoon Cox

Mar 27, 2024• Proven solutions

GIFs are stealing the show all across the internet. The cool repetition of frames is perfect for catching attention and wooing your audience. You can use GIFs on websites, social media, chats, and a number of channels. No wonder everybody is mad about GIFs!

Many among us now make and edit GIFs to upload on various websites. You will need to create GIF loops to control how your GIFs play online. Here are the best GIF loop maker tools for you to give expression to your creativity.

Part 1: Best FREE GIF Infinite Loop Maker Online

If you prefer to create a looping GIF online without downloading any gif makers on a computer or smartphone, you should try the following online gif makers .

2. EZGIF.com

EZGIF is a simple loop maker for basic needs. You can create infinite loops or select a finite number of repetitions. EZGIF is suitable for casual use and lets you add a few effects to your GIFs. However, you can’t perform advanced functions. So, the tool is not ideal for professional use.

The good part is, you can quickly create GIF loops from your browser. The whole thing is online and totally free. Let’s take you over the process of creating an infinite GIF loop in EZGIF.

Head over to the EZGIF website in your browser and click the “GIF Maker” tab on top of the page.

Click on “Choose Files” and select the image or video files on your computer. Now, click on “Upload and make a GIF.”

You can now select your GIF loop parameters. Leave the “Loop count” box blank if you want an infinite loop. Or put a value according to your choice.
Click the “Make a GIF” button to save changes, and your looping GIF is ready.

You can also change the loop count by using the EZGIF loop count changer . Just upload your GIF and provide the loop count or choose an infinite loop.

3. LunaPic

LunaPic is a browser-based image and GIF editor. You can use the simple GIF loop maker to edit and create infinite GIF loops. The tool also allows you to add a limited number of effects to your GIFs. Beginners can use this tool and gain experience before moving on to serious GIF makers.

Launch the LunaPic website and select “Quick Upload.” Choose your GIF on your device to upload. You can also paste any GIF URL.

Select “Animation” on top of the page and click on “Edit GIF Animation.”

Choose the “Loop Forever” option from the drop-down menu beside “Looping.”

4. GIFMaker.me

GIFMaker.me is another basic GIF loop maker and editor. You can create GIFs with infinities loops and upload them on websites and forums. The tool also lets you change sizes and create image slideshows and animations.

Here is how you can make an infinite GIF loop in GIFMaker.me.

Open the GIFMaker website and click on “Upload Images.”
Look at the control panel on the right side of the page. Leave the “Repeat times” box unchanged at 0 if you want an infinite loop. Else, you can create any number of loops.

Click on the “Create GIF Animation” button.

Part 2: Best Apps for Making GIF Loops on iPhone and Android

1. Loop Video & GIF Maker

This is a great tool for iPhone and iOS users to create GIFs with infinite loops. You can download the app and quickly get down to creating GIFs. The app is also suitable for converting videos to GIFs.

The process of creating GIFs with infinite loops is more or less simple. You can add videos from your iPhone and choose the part for making your GIF.

You will be able to choose the speed of your GIF before saving the file. All GIFs have infinite loops by default. So, you don’t need to change any settings or configurations.

The app is available for free but has a number of limitations. For example, you can only create GIFs from videos.

2. GIF Maker, GIF Editor, Video Maker, Video to GIF

Android users can use this app to create GIFs in a jiffy. You can make GIFs out of images, videos, and more and create infinite loops by default. The app is also useful for quickly editing your images or files before making them into GIFs.

You can record videos or click an image for GIF conversion. Existing GIFs on your phone can also be edited and turned into an infinite loop.

Along with that, you will also be able to control the play speed of your GIFs.

Bonus: How to Make A Loop GIF Seamlessly in Wondershare Filmora?

Filmora X is a professional video and GIF editing software. You can enjoy countless advanced features and create cool GIFs with infinite loops. The tool is available for a free trial, and you can try out all features without restrictions.

Here are the steps to create your infinite loop GIF in Filmora X.

Launch Filmora X and add your GIFs, videos, and images to your timeline.
If you want to change the GIF’s animation speed or change the video playback speed to make a short GIF, click the Speed icon and then select Fast and pick a proper option. If you want, you can even reverse your GIF.

When saving media file to a GIF will remove the audio, so words are useful in GIF. Filmora allows you to add plain or animated text to your GIFs. Just select “Titles” from the top of your tool and add your words in various styles.

You can add various special effects and filters to improve your GIFs. After you are done, click on “Export as GIF” to save your file. You can edit various settings like resolution and frame rate for a better-looking GIF.

Conclusion

Creating infinite GIF loops is an easy task when you have the right tool. Use any tool from our list or choose Filmora X for the best results. You will be able to create not only GIFs but also top-notch videos with advanced editing capabilities.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Part 1: Best FREE GIF Infinite Loop Maker Online

If you prefer to create a looping GIF online without downloading any gif makers on a computer or smartphone, you should try the following online gif makers .

2. EZGIF.com

The good part is, you can quickly create GIF loops from your browser. The whole thing is online and totally free. Let’s take you over the process of creating an infinite GIF loop in EZGIF.

Head over to the EZGIF website in your browser and click the “GIF Maker” tab on top of the page.

Click on “Choose Files” and select the image or video files on your computer. Now, click on “Upload and make a GIF.”

You can now select your GIF loop parameters. Leave the “Loop count” box blank if you want an infinite loop. Or put a value according to your choice.
Click the “Make a GIF” button to save changes, and your looping GIF is ready.

You can also change the loop count by using the EZGIF loop count changer . Just upload your GIF and provide the loop count or choose an infinite loop.

3. LunaPic

Launch the LunaPic website and select “Quick Upload.” Choose your GIF on your device to upload. You can also paste any GIF URL.

Select “Animation” on top of the page and click on “Edit GIF Animation.”

Choose the “Loop Forever” option from the drop-down menu beside “Looping.”

4. GIFMaker.me

Here is how you can make an infinite GIF loop in GIFMaker.me.

Open the GIFMaker website and click on “Upload Images.”
Look at the control panel on the right side of the page. Leave the “Repeat times” box unchanged at 0 if you want an infinite loop. Else, you can create any number of loops.

Click on the “Create GIF Animation” button.

Part 2: Best Apps for Making GIF Loops on iPhone and Android

1. Loop Video & GIF Maker

The process of creating GIFs with infinite loops is more or less simple. You can add videos from your iPhone and choose the part for making your GIF.

You will be able to choose the speed of your GIF before saving the file. All GIFs have infinite loops by default. So, you don’t need to change any settings or configurations.

The app is available for free but has a number of limitations. For example, you can only create GIFs from videos.

2. GIF Maker, GIF Editor, Video Maker, Video to GIF

You can record videos or click an image for GIF conversion. Existing GIFs on your phone can also be edited and turned into an infinite loop.

Along with that, you will also be able to control the play speed of your GIFs.

Bonus: How to Make A Loop GIF Seamlessly in Wondershare Filmora?

Here are the steps to create your infinite loop GIF in Filmora X.

Launch Filmora X and add your GIFs, videos, and images to your timeline.
If you want to change the GIF’s animation speed or change the video playback speed to make a short GIF, click the Speed icon and then select Fast and pick a proper option. If you want, you can even reverse your GIF.

When saving media file to a GIF will remove the audio, so words are useful in GIF. Filmora allows you to add plain or animated text to your GIFs. Just select “Titles” from the top of your tool and add your words in various styles.

You can add various special effects and filters to improve your GIFs. After you are done, click on “Export as GIF” to save your file. You can edit various settings like resolution and frame rate for a better-looking GIF.

Conclusion

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Part 1: Best FREE GIF Infinite Loop Maker Online

If you prefer to create a looping GIF online without downloading any gif makers on a computer or smartphone, you should try the following online gif makers .

2. EZGIF.com

The good part is, you can quickly create GIF loops from your browser. The whole thing is online and totally free. Let’s take you over the process of creating an infinite GIF loop in EZGIF.

Head over to the EZGIF website in your browser and click the “GIF Maker” tab on top of the page.

Click on “Choose Files” and select the image or video files on your computer. Now, click on “Upload and make a GIF.”

You can now select your GIF loop parameters. Leave the “Loop count” box blank if you want an infinite loop. Or put a value according to your choice.
Click the “Make a GIF” button to save changes, and your looping GIF is ready.

You can also change the loop count by using the EZGIF loop count changer . Just upload your GIF and provide the loop count or choose an infinite loop.

3. LunaPic

Launch the LunaPic website and select “Quick Upload.” Choose your GIF on your device to upload. You can also paste any GIF URL.

Select “Animation” on top of the page and click on “Edit GIF Animation.”

Choose the “Loop Forever” option from the drop-down menu beside “Looping.”

4. GIFMaker.me

Here is how you can make an infinite GIF loop in GIFMaker.me.

Open the GIFMaker website and click on “Upload Images.”
Look at the control panel on the right side of the page. Leave the “Repeat times” box unchanged at 0 if you want an infinite loop. Else, you can create any number of loops.

Click on the “Create GIF Animation” button.

Part 2: Best Apps for Making GIF Loops on iPhone and Android

1. Loop Video & GIF Maker

The process of creating GIFs with infinite loops is more or less simple. You can add videos from your iPhone and choose the part for making your GIF.

You will be able to choose the speed of your GIF before saving the file. All GIFs have infinite loops by default. So, you don’t need to change any settings or configurations.

The app is available for free but has a number of limitations. For example, you can only create GIFs from videos.

2. GIF Maker, GIF Editor, Video Maker, Video to GIF

You can record videos or click an image for GIF conversion. Existing GIFs on your phone can also be edited and turned into an infinite loop.

Along with that, you will also be able to control the play speed of your GIFs.

Bonus: How to Make A Loop GIF Seamlessly in Wondershare Filmora?

Here are the steps to create your infinite loop GIF in Filmora X.

Launch Filmora X and add your GIFs, videos, and images to your timeline.
If you want to change the GIF’s animation speed or change the video playback speed to make a short GIF, click the Speed icon and then select Fast and pick a proper option. If you want, you can even reverse your GIF.

When saving media file to a GIF will remove the audio, so words are useful in GIF. Filmora allows you to add plain or animated text to your GIFs. Just select “Titles” from the top of your tool and add your words in various styles.

You can add various special effects and filters to improve your GIFs. After you are done, click on “Export as GIF” to save your file. You can edit various settings like resolution and frame rate for a better-looking GIF.

Conclusion

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Part 1: Best FREE GIF Infinite Loop Maker Online

If you prefer to create a looping GIF online without downloading any gif makers on a computer or smartphone, you should try the following online gif makers .

2. EZGIF.com

The good part is, you can quickly create GIF loops from your browser. The whole thing is online and totally free. Let’s take you over the process of creating an infinite GIF loop in EZGIF.

Head over to the EZGIF website in your browser and click the “GIF Maker” tab on top of the page.

Click on “Choose Files” and select the image or video files on your computer. Now, click on “Upload and make a GIF.”

You can now select your GIF loop parameters. Leave the “Loop count” box blank if you want an infinite loop. Or put a value according to your choice.
Click the “Make a GIF” button to save changes, and your looping GIF is ready.

You can also change the loop count by using the EZGIF loop count changer . Just upload your GIF and provide the loop count or choose an infinite loop.

3. LunaPic

Launch the LunaPic website and select “Quick Upload.” Choose your GIF on your device to upload. You can also paste any GIF URL.

Select “Animation” on top of the page and click on “Edit GIF Animation.”

Choose the “Loop Forever” option from the drop-down menu beside “Looping.”

4. GIFMaker.me

Here is how you can make an infinite GIF loop in GIFMaker.me.

Open the GIFMaker website and click on “Upload Images.”
Look at the control panel on the right side of the page. Leave the “Repeat times” box unchanged at 0 if you want an infinite loop. Else, you can create any number of loops.

Click on the “Create GIF Animation” button.

Part 2: Best Apps for Making GIF Loops on iPhone and Android

1. Loop Video & GIF Maker

The process of creating GIFs with infinite loops is more or less simple. You can add videos from your iPhone and choose the part for making your GIF.

You will be able to choose the speed of your GIF before saving the file. All GIFs have infinite loops by default. So, you don’t need to change any settings or configurations.

The app is available for free but has a number of limitations. For example, you can only create GIFs from videos.

2. GIF Maker, GIF Editor, Video Maker, Video to GIF

You can record videos or click an image for GIF conversion. Existing GIFs on your phone can also be edited and turned into an infinite loop.

Along with that, you will also be able to control the play speed of your GIFs.

Bonus: How to Make A Loop GIF Seamlessly in Wondershare Filmora?

Here are the steps to create your infinite loop GIF in Filmora X.

Launch Filmora X and add your GIFs, videos, and images to your timeline.
If you want to change the GIF’s animation speed or change the video playback speed to make a short GIF, click the Speed icon and then select Fast and pick a proper option. If you want, you can even reverse your GIF.

When saving media file to a GIF will remove the audio, so words are useful in GIF. Filmora allows you to add plain or animated text to your GIFs. Just select “Titles” from the top of your tool and add your words in various styles.

You can add various special effects and filters to improve your GIFs. After you are done, click on “Export as GIF” to save your file. You can edit various settings like resolution and frame rate for a better-looking GIF.

Conclusion

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Ai Video Tools

Updated Unleash the Power of Time FCPX Freeze Frames and Slow Motion Tutorials for 2024

Unleash the Power of Time: FCPX Freeze Frames and Slow Motion Tutorials

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Top Free Video Smoothers for PC and Mac

Top 10 Best Free Video Stabilization Software for Windows and Mac

1. iMovie

2. Windows movie maker

3. HitFilm express

4. FilmForth

5. Video DeShake

6. Shotcut

7. Blender

8. AVS video stabilizer

9. VSDC

10. Openshot

Bonus: Stabilize shaky videos using Filmora video editor

2. Windows movie maker

3. HitFilm express

4. FilmForth

5. Video DeShake

6. Shotcut

7. Blender

8. AVS video stabilizer

9. VSDC

10. Openshot

Bonus: Stabilize shaky videos using Filmora video editor

2. Windows movie maker

3. HitFilm express

4. FilmForth

5. Video DeShake

6. Shotcut

7. Blender

8. AVS video stabilizer

9. VSDC

10. Openshot

Bonus: Stabilize shaky videos using Filmora video editor

2. Windows movie maker

3. HitFilm express

4. FilmForth

5. Video DeShake

6. Shotcut

7. Blender

8. AVS video stabilizer

9. VSDC

10. Openshot

Bonus: Stabilize shaky videos using Filmora video editor

Measure and Modify Image Proportionality

In this article

Part 1 What is the image ratio?

Part 2 Where Can I Find the Image ratio?

Method 1: Check your Camera