Mastering Audio-Video Sync in FCPX 2024: Tips and Tricks

Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024

Shanoon Cox

Mar 27, 2024• Proven solutions

Beautifully captured cinematic footage with crystal clear results and melodious audio attracts viewers and leaves an everlasting impression. However, if there is a delay in the audio and video, you need to sync audio and video clips.

Only an advanced video-editing software like Final Cut Pro X can solve this problem and get everything lined up and cohesive. Its auto-sync feature allows you to adjust audio with video and present your footage realistically and creatively. Similarly, users can create Multicam clips and include multiple clips at any given angle with the FCPX.

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

Whenever you face an out-of-sync problem, don’t assume that the clips in your sequence are also out of sync. Multiple factors can cause sync issues, the most prominent one is by an over-taxing of the processor when it tries to run the program at its maximum. Consequently, the overstressed processer fails to sync audio and video accordingly and causes a delay.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Final Cut Pro X is an advanced and user-friendly video editing application. Its auto-sync feature automatically analyzes the audio and video clips selected in your timeline and allows you to sync video with audio.

To use this feature, use multiple audio and video clips recorded from different resources during the same take. Once you have selected, Final Cut Pro will automatically start analyzing the clips for sync points like date of file creation, markers, audio content, and time code, etc. After analyzing the clips, the syncing process will begin in which these audio and video clips will be synced together into a new clip without affecting the original clip. Even if your clips do not have any sync points, Final Cut Pro X will sync them at their respective starting points.

Users can also use custom settings for an advanced syncing process by adjusting different parameters according to their preferences. The following section explains the manual syncing process of audio and video clips in Final Cut Pro X.

This way, you can sync Multicam using audio in the Final Cut Pro X. To verify or adjust the sync, open the Multicam clip in the Angle Editor and drag it to the left or right. For single-frame adjustment, you can use the comma/period keys, while the left/right angle bracket is used for 10-frame adjustments.

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

After you have captured beautifully cinematic footage of a beach and recorded the audio separately, it’s time to add magic. If your results are crystal clear and the audio sounds melodious, you need to sync the audio and video clips and get everything lined up and cohesive.

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Multicam is an amazing feature of the Final Cut Pro X that allows users to sync a multiple-camera job and manage unlimited video and audio angles. You can make Multicam clips with diverse media sources and include as many clips in any given angle as you want. Make sure you have labeled your clips with a camera name or an angle to make Final Cut Pro X sync Multicam properly. You can even name all the clips shot by one camera in a single step.

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

Final Cut Pro X is a professional video editing software used by both beginners and experienced photographers to create magic in their videos. Powered by several amazing features and advanced video-editing options, the application features a trackless magnetic timeline and supports compound clips.

Sometimes, an over-taxing of the processor may cause a delay in the video edited by Final Cut Pro X. Hence, the audio and video are out of sync that declines the video quality. To solve this problem, Apple Inc. introduced an auto-sync feature in FCPX which automatically analyzes and synchronizes the audio and video clips. You can also match audio and video manually by selecting any two clips and selecting the Synchronize Clips option.

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Read this beginner’s guide to learn how to sync audio and video and create Multicam clips in the Final Cut Pro X.

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Part 1: How to Fix Audio and Video Sync Issue?

Why is Audio and Video out of Sync in Final Cut Pro X?

The audio and video out of sync is a common issue faced by most Final Cut Pro X users. They experience an audio delay in their edited video that gives a bad impression and haunts the user experience.

If you are experiencing an audio and video sync problem due to an over-taxing of your computer’s processor, follow these steps to relieve processor stress and solve your problem.

Set the Canvas size to “Fit Window”
Prevent the Canvas and Viewer from overlapping
Use an updated, fast, and consistent hard drive that meets the minimum software requirements of Final Cut Pro X
Set the control panel resolution must be to 75A Hz or higher
Do not select too many real-time audio tracks
Turn off the Mirror to Desktop option
Avoid opening multiple sequences simultaneously
Render the video sequence to a single file.

Part 2: How to Auto-sync in Final Cut Pro X?

Sync can be pretty easy with handy editing tools, like final cut pro, or Filmora, a much friendlier editor for beginners. Learn more about sync in the video below.

And download Filmora to have a try!

In case you may want to learn how to Edit the Beat and Sync Videos to Music.

Best Video Editing Apps to Sync Video to the Beat of a Song.

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Follow these simple steps to sync audio and video manually with Final Cut Pro X:

First of all, import your audio and video clips and in the FCPX browser and select the ones to be synced;
Select any two clips from imported files and right-click on them to open a dropdown menu. Choose Clip > Synchronize Clips to begin the syncing process. You can also use the shortcut Option + Command + G;

Final Cut Pro X will analyze the clips and create a new clip by identifying the exact sync point. Once the analysis has been completed, give a name to your newly-synced clip and select the Use Audio for syncing. Keep organization in your mind since you may have to manage with multiple clips depending on your project size. Besides, you can remove your reference audio from the video track by disabling audio components on AV clips;

Click OK and let the program complete the syncing process. Once the Final Cut Pro X has generated a synced clip with your specified name, click and drag that clip into your timeline.
Go to the Audio Inspector window, identify your main audio feed, and select that audio track to isolate the channel. Playback the audio to make sure there’s no delay and it has been synced with the video. You’re done! Enjoy your synced video.

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Follow these steps to create Multicam clips:

Create unique folders and put all clips from each camera in these folders separately.
Go to Preferences > Import > Keywords and set the Finder Tags to label the imported clips and set the shots apart from the filenames.
In the FCPX menu, go to View > Browser > Toggle Filmstrip/List View for setting the Event Browser to List View. (You can also use the command OPT+CMD+2).
If some of your clips have an incorrect time of day, you should adjust them first. Hence, select those clips and click Modify > Adjust Content Created Date and Time.
In the Event Browser, select multiple clips captured with one camera or audio recorder.
Press CMD+4 to show the Inspector, click the “i” button, and verify the clip’s information like camera name, etc.
Give a specific camera name to the selected clips and press return and repeat the process for each audio recorder and camera.
In the Event Browser, select multiple clips that need to be synced. Right-click on these clips and select the “Synchronize Clips” or “New Multicam Clip” option.
Click the checkbox “Use Audio for Synchronization” to sync audio.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Finally, the Multicam feature allows you to make include various clips in your Multicam clip from diverse media sources and manage unlimited video and audio angles.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Cut, Merge, Repeat: The 5 Best Free Online Video Merging Tools You Should Know

Top 20 Adobe Premiere Shortcuts You Will Use When Editing Video Files

Benjamin Arango

Mar 27, 2024• Proven solutions

Whilst the conventional mouse control allows you to perform any task that Premiere is capable of, for efficient workflow the keyboard shortcuts cannot be beaten. We all work a little differently, and thankfully Adobe understands that, so although here we will be concentrating on the standard keyboard layout, the keyboard shortcuts can be customized to be anything you want and saved as a custom profile, there are even presets already included for Avid Media Composer and Final Cut Pro for those who are maybe transitioning from those packages or just prefer the way they work.

This is a basic tutorial about Adobe Premiere, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora (originally Wondershare Video Editor) , which is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

This is achieved by going through the path edit > keyboard shortcuts as below:

Before we step into the most useful shortcuts, a brief note here on the different platforms, although I’m sure most readers are aware. The PC and Mac versions of the software do share the same basic shortcuts with the one caveat that where the PC uses the Control and Alt keys, the Mac has Command and Option keys instead. Other than that the functionality is the same. I’ll include the shortcuts for both platforms with each to make referencing easier.

1Select Window

I’m starting with this one simply because I find it the most used of all, especially if like me you prefer a custom layout for all your windows. If your program monitor is hidden for instance, you can just press shift+4 and there it is. The shortcuts are the same for both platforms here.

Audio Clip Mixer Shift+9
Audio Track Mixer Shift+6
Effect Controls Shift+5
Effects Shift+7
Media Browser Shift+8
Program Monitor Shift+4
Project Shift+1
Source Monitor Shift+2
Timelines Shift+3

2 Import

Whilst the shortcuts for editing and manipulating clips are extremely important for efficient workflow, it should be remembered that those relating to the basic operation of the program are just as useful, as we see here. Using Control and I (Command and I on Mac) brings up the import media dialogue box instantly.

3Capture Panel

There are multiple shortcuts that can be used within the capture panel, but because this is such an intrinsic aspect of the Premiere workflow, being the entry into a project for all media, I think the available shortcuts are all as valuable as each other here.

Navigate Through Fields - Tab
Cancel Capture - Esc
Fast Forward - F
Rewind - R
Go to In Point - Q
Go to Out Point - W
Record - G
Stop - S
Step Back - Left Arrow
Step Forward - Right Arrow

4 Timeline Panel

In a similar vein to the Capture Panel, the Timeline Panel has a set of shortcuts specific to all its basic operations, and are essential for a faster workflow.

Clear Ins and Outs - G
Clear In Point - D
Clear Out Point - F
Go to In Point- Q
Go to Out Point - W
Match Frame - M
Start and Stop - Spacebar
Play Normal Speed - L
Play Reverse Normal Speed - J
Set In Point - I
Set Out Point - o
Shuttle Stop - K
Trim - T
Arc Tool - A
Ellipse Tool – E

This one works within the program monitor/timeline or source monitor windows, ensure the desired one is active first of course. You can move to a specific time code within the clip, or go forwards or backwards a set number of frames using the number pad. To go to a specific time code simply type that on the number pad. To travel a set number of frames simply type + or – (to signify direction) and the number of frames.

6Marking Clips

By far the simplest way to mark clips is to use the keyboard shortcut.

For marking clips use X , whilst marking a selection is / .

7 In and Out

In addition to marking clips via shortcuts, it is also far easier to mark In and Out points this way.

To Mark In use I , whilst to mark Out use O .
To Clear In the shortcut is Control+Shift+I for PC and Option+I for Mac.
To Clear Out Control+Shift+O for PC, Option+O for Mac.

8Playing Clips

Going hand in hand with the shortcuts for marking, are the keyboard commands for playing clips. These are:

Play In to Out: Control+Shift+Space (PC) and Option+K for Mac
Clear In and Out: Control+Shift+X (PC) and Option+X for Mac
Play Around: The same for both platforms and is Shift+K.

To get the best from this it is necessary to set some options beforehand, as Play Around plays the portion of the timeline around the Playhead, and where it plays is dependent on the options set. This is done through the menu via edit > preferences > playback, here I have preroll and postroll set to 4 seconds, meaning that it plays 4 seconds prior and following the point where the playhead is placed.

In addition, turning on looping for this can help to fine tune edits.

9Toggle Audio During Scrubbing

There are times you may want to hear audio when scrubbing, however turning it off can have beneficial effects on performance for lower end computers. The shortcut makes it an easy process to turn off and on as required.

The shortcut is Shift+S for both platforms.

10Slide a clip within the sequence

There are a couple of options available here from the shortcuts, slide one frame or 5 frames.

To slide one frame to the left is Alt+, for PC or Option+, for Mac. To increase to five frames add Shift to either shortcut.
To slide one frame to the right is Alt+. for PC and Option+. for Mac. Again, to increase to five frames add Shift.

11Slip within a sequence

As with the slide options, the choice is one frame or five frames.

To slip one frame to the left is Control+Alt+Left for PC or Option+Command+Left for Mac. To increase to five frames add Shift to either shortcut.
To slip one frame to the right is Control+Alt+Right for PC and Option+Command+Right for Mac. Again, to increase to five frames add Shift.

12Nudging

You can move a clip up or down simply by using the Up and Down arrow keys, whilst holding Alt or Option at the same time allows you to select just the video or audio to move.

13Multi Camera Selection

This is a tool that allows you to work with multiple camera angles of the same subject or scene. To switch between different cameras quickly is extremely useful and accomplished with the numerical keys.

Numbers 1 through 9 select the corresponding camera.

14Add an edit

This option cuts the track (or tracks) that are targeted. The shortcut for this is Control+K or Command+K.

You can view all added edits within a sequence by selecting show through edits within the sequence menu.

15Add the default Transition

This option applies the default transition to all selected media. To do this use Shift+D.

16 Match Frame

Locating a specific frame within the sequence for adding in a second clip is very useful, the shortcut is M, a great timesaver.

17Zoom to sequence

Being able to zoom in is great, it makes working in the sequence panel much easier, at least for me, however the one drawback I find is that I tend to get lost when looking for a particular clip. Using / enable you to quickly zoom out for navigation and back in again to work

18Jump to Edit

Navigating from edit to edit is a very simple process with the shortcuts available to you.

Page up takes you to the previous edit point, whilst page down takes you to the next.

With practice these shortcuts become second nature and you will find your workflow becomes not only faster but a smoother operation as well.

19Toggle the type of Trim used

Quickly shift between Standard, Ripple and Roll trim types.

Shift+T for PC, Control+T for Mac

20Ripple Trim

This enables you to trim the head or tail of the clip very quickly, making an extremely efficient workflow. To trim the next edit from the Playhead use W, for the previous edit from the playhead use Q.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

This is achieved by going through the path edit > keyboard shortcuts as below:

1Select Window

Audio Clip Mixer Shift+9
Audio Track Mixer Shift+6
Effect Controls Shift+5
Effects Shift+7
Media Browser Shift+8
Program Monitor Shift+4
Project Shift+1
Source Monitor Shift+2
Timelines Shift+3

2 Import

3Capture Panel

Navigate Through Fields - Tab
Cancel Capture - Esc
Fast Forward - F
Rewind - R
Go to In Point - Q
Go to Out Point - W
Record - G
Stop - S
Step Back - Left Arrow
Step Forward - Right Arrow

4 Timeline Panel

In a similar vein to the Capture Panel, the Timeline Panel has a set of shortcuts specific to all its basic operations, and are essential for a faster workflow.

Clear Ins and Outs - G
Clear In Point - D
Clear Out Point - F
Go to In Point- Q
Go to Out Point - W
Match Frame - M
Start and Stop - Spacebar
Play Normal Speed - L
Play Reverse Normal Speed - J
Set In Point - I
Set Out Point - o
Shuttle Stop - K
Trim - T
Arc Tool - A
Ellipse Tool – E

6Marking Clips

By far the simplest way to mark clips is to use the keyboard shortcut.

For marking clips use X , whilst marking a selection is / .

7 In and Out

In addition to marking clips via shortcuts, it is also far easier to mark In and Out points this way.

To Mark In use I , whilst to mark Out use O .
To Clear In the shortcut is Control+Shift+I for PC and Option+I for Mac.
To Clear Out Control+Shift+O for PC, Option+O for Mac.

8Playing Clips

Going hand in hand with the shortcuts for marking, are the keyboard commands for playing clips. These are:

Play In to Out: Control+Shift+Space (PC) and Option+K for Mac
Clear In and Out: Control+Shift+X (PC) and Option+X for Mac
Play Around: The same for both platforms and is Shift+K.

In addition, turning on looping for this can help to fine tune edits.

9Toggle Audio During Scrubbing

The shortcut is Shift+S for both platforms.

10Slide a clip within the sequence

There are a couple of options available here from the shortcuts, slide one frame or 5 frames.

To slide one frame to the left is Alt+, for PC or Option+, for Mac. To increase to five frames add Shift to either shortcut.
To slide one frame to the right is Alt+. for PC and Option+. for Mac. Again, to increase to five frames add Shift.

11Slip within a sequence

As with the slide options, the choice is one frame or five frames.

To slip one frame to the left is Control+Alt+Left for PC or Option+Command+Left for Mac. To increase to five frames add Shift to either shortcut.
To slip one frame to the right is Control+Alt+Right for PC and Option+Command+Right for Mac. Again, to increase to five frames add Shift.

12Nudging

You can move a clip up or down simply by using the Up and Down arrow keys, whilst holding Alt or Option at the same time allows you to select just the video or audio to move.

13Multi Camera Selection

Numbers 1 through 9 select the corresponding camera.

14Add an edit

This option cuts the track (or tracks) that are targeted. The shortcut for this is Control+K or Command+K.

You can view all added edits within a sequence by selecting show through edits within the sequence menu.

15Add the default Transition

This option applies the default transition to all selected media. To do this use Shift+D.

16 Match Frame

Locating a specific frame within the sequence for adding in a second clip is very useful, the shortcut is M, a great timesaver.

17Zoom to sequence

18Jump to Edit

Navigating from edit to edit is a very simple process with the shortcuts available to you.

Page up takes you to the previous edit point, whilst page down takes you to the next.

With practice these shortcuts become second nature and you will find your workflow becomes not only faster but a smoother operation as well.

19Toggle the type of Trim used

Quickly shift between Standard, Ripple and Roll trim types.

Shift+T for PC, Control+T for Mac

20Ripple Trim

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

This is achieved by going through the path edit > keyboard shortcuts as below:

1Select Window

Audio Clip Mixer Shift+9
Audio Track Mixer Shift+6
Effect Controls Shift+5
Effects Shift+7
Media Browser Shift+8
Program Monitor Shift+4
Project Shift+1
Source Monitor Shift+2
Timelines Shift+3

2 Import

3Capture Panel

Navigate Through Fields - Tab
Cancel Capture - Esc
Fast Forward - F
Rewind - R
Go to In Point - Q
Go to Out Point - W
Record - G
Stop - S
Step Back - Left Arrow
Step Forward - Right Arrow

4 Timeline Panel

In a similar vein to the Capture Panel, the Timeline Panel has a set of shortcuts specific to all its basic operations, and are essential for a faster workflow.

Clear Ins and Outs - G
Clear In Point - D
Clear Out Point - F
Go to In Point- Q
Go to Out Point - W
Match Frame - M
Start and Stop - Spacebar
Play Normal Speed - L
Play Reverse Normal Speed - J
Set In Point - I
Set Out Point - o
Shuttle Stop - K
Trim - T
Arc Tool - A
Ellipse Tool – E

6Marking Clips

By far the simplest way to mark clips is to use the keyboard shortcut.

For marking clips use X , whilst marking a selection is / .

7 In and Out

In addition to marking clips via shortcuts, it is also far easier to mark In and Out points this way.

To Mark In use I , whilst to mark Out use O .
To Clear In the shortcut is Control+Shift+I for PC and Option+I for Mac.
To Clear Out Control+Shift+O for PC, Option+O for Mac.

8Playing Clips

Going hand in hand with the shortcuts for marking, are the keyboard commands for playing clips. These are:

Play In to Out: Control+Shift+Space (PC) and Option+K for Mac
Clear In and Out: Control+Shift+X (PC) and Option+X for Mac
Play Around: The same for both platforms and is Shift+K.

In addition, turning on looping for this can help to fine tune edits.

9Toggle Audio During Scrubbing

The shortcut is Shift+S for both platforms.

10Slide a clip within the sequence

There are a couple of options available here from the shortcuts, slide one frame or 5 frames.

To slide one frame to the left is Alt+, for PC or Option+, for Mac. To increase to five frames add Shift to either shortcut.
To slide one frame to the right is Alt+. for PC and Option+. for Mac. Again, to increase to five frames add Shift.

11Slip within a sequence

As with the slide options, the choice is one frame or five frames.

To slip one frame to the left is Control+Alt+Left for PC or Option+Command+Left for Mac. To increase to five frames add Shift to either shortcut.
To slip one frame to the right is Control+Alt+Right for PC and Option+Command+Right for Mac. Again, to increase to five frames add Shift.

12Nudging

You can move a clip up or down simply by using the Up and Down arrow keys, whilst holding Alt or Option at the same time allows you to select just the video or audio to move.

13Multi Camera Selection

Numbers 1 through 9 select the corresponding camera.

14Add an edit

This option cuts the track (or tracks) that are targeted. The shortcut for this is Control+K or Command+K.

You can view all added edits within a sequence by selecting show through edits within the sequence menu.

15Add the default Transition

This option applies the default transition to all selected media. To do this use Shift+D.

16 Match Frame

Locating a specific frame within the sequence for adding in a second clip is very useful, the shortcut is M, a great timesaver.

17Zoom to sequence

18Jump to Edit

Navigating from edit to edit is a very simple process with the shortcuts available to you.

Page up takes you to the previous edit point, whilst page down takes you to the next.

With practice these shortcuts become second nature and you will find your workflow becomes not only faster but a smoother operation as well.

19Toggle the type of Trim used

Quickly shift between Standard, Ripple and Roll trim types.

Shift+T for PC, Control+T for Mac

20Ripple Trim

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

This is achieved by going through the path edit > keyboard shortcuts as below:

1Select Window

Audio Clip Mixer Shift+9
Audio Track Mixer Shift+6
Effect Controls Shift+5
Effects Shift+7
Media Browser Shift+8
Program Monitor Shift+4
Project Shift+1
Source Monitor Shift+2
Timelines Shift+3

2 Import

3Capture Panel

Navigate Through Fields - Tab
Cancel Capture - Esc
Fast Forward - F
Rewind - R
Go to In Point - Q
Go to Out Point - W
Record - G
Stop - S
Step Back - Left Arrow
Step Forward - Right Arrow

4 Timeline Panel

In a similar vein to the Capture Panel, the Timeline Panel has a set of shortcuts specific to all its basic operations, and are essential for a faster workflow.

Clear Ins and Outs - G
Clear In Point - D
Clear Out Point - F
Go to In Point- Q
Go to Out Point - W
Match Frame - M
Start and Stop - Spacebar
Play Normal Speed - L
Play Reverse Normal Speed - J
Set In Point - I
Set Out Point - o
Shuttle Stop - K
Trim - T
Arc Tool - A
Ellipse Tool – E

6Marking Clips

By far the simplest way to mark clips is to use the keyboard shortcut.

For marking clips use X , whilst marking a selection is / .

7 In and Out

In addition to marking clips via shortcuts, it is also far easier to mark In and Out points this way.

To Mark In use I , whilst to mark Out use O .
To Clear In the shortcut is Control+Shift+I for PC and Option+I for Mac.
To Clear Out Control+Shift+O for PC, Option+O for Mac.

8Playing Clips

Going hand in hand with the shortcuts for marking, are the keyboard commands for playing clips. These are:

Play In to Out: Control+Shift+Space (PC) and Option+K for Mac
Clear In and Out: Control+Shift+X (PC) and Option+X for Mac
Play Around: The same for both platforms and is Shift+K.

In addition, turning on looping for this can help to fine tune edits.

9Toggle Audio During Scrubbing

The shortcut is Shift+S for both platforms.

10Slide a clip within the sequence

There are a couple of options available here from the shortcuts, slide one frame or 5 frames.

To slide one frame to the left is Alt+, for PC or Option+, for Mac. To increase to five frames add Shift to either shortcut.
To slide one frame to the right is Alt+. for PC and Option+. for Mac. Again, to increase to five frames add Shift.

11Slip within a sequence

As with the slide options, the choice is one frame or five frames.

To slip one frame to the left is Control+Alt+Left for PC or Option+Command+Left for Mac. To increase to five frames add Shift to either shortcut.
To slip one frame to the right is Control+Alt+Right for PC and Option+Command+Right for Mac. Again, to increase to five frames add Shift.

12Nudging

You can move a clip up or down simply by using the Up and Down arrow keys, whilst holding Alt or Option at the same time allows you to select just the video or audio to move.

13Multi Camera Selection

Numbers 1 through 9 select the corresponding camera.

14Add an edit

This option cuts the track (or tracks) that are targeted. The shortcut for this is Control+K or Command+K.

You can view all added edits within a sequence by selecting show through edits within the sequence menu.

15Add the default Transition

This option applies the default transition to all selected media. To do this use Shift+D.

16 Match Frame

Locating a specific frame within the sequence for adding in a second clip is very useful, the shortcut is M, a great timesaver.

17Zoom to sequence

18Jump to Edit

Navigating from edit to edit is a very simple process with the shortcuts available to you.

Page up takes you to the previous edit point, whilst page down takes you to the next.

With practice these shortcuts become second nature and you will find your workflow becomes not only faster but a smoother operation as well.

19Toggle the type of Trim used

Quickly shift between Standard, Ripple and Roll trim types.

Shift+T for PC, Control+T for Mac

20Ripple Trim

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

From Video to Audio: Top-Rated MP4 to MP3 Conversion Software

MP4 2 MP3: Best MP4 to MP3 Converters

Ollie Mattison

Mar 27, 2024• Proven solutions

The MP4 file format is probably the most commonly used video file format today, as various video recording devices use it as the default video file format. The duration of a video and the resolution in which a video was captured determine its size, so the size of an MP4 file can vary between a couple of hundred of megabytes to a couple of gigabytes. That’s why there is no reason to store huge MP4 files if you only need their audio since converting this type of file to an MP3 file format is a simple process. Read on if you would like to learn more about the best MP4 to MP3 converters you can use online or on PC and Mac computers.

Best Mac and PC-based MP4 to MP3 Converters

Both Mac and PC users have a broad range of free software products at their disposal that enable them to convert MP4 video file to MP3 audio files. So, let’s take a look at some of the easiest ways to turn MP4 to MP3 on a Mac or a PC.

1. Using Filmora to Convert MP4 to MP3 Files

Filmora is a powerful video editing software that is compatible with both macOS and Windows operating systems. Besides offering a plethora of video editing tools you can use to create green-screen videos, stabilize shaky footage captured with action cameras or make the Picture-in-Picture effect, Filmora also lets you edit audio files with ease. The built-in library of royalty-free music and audio effects enables you to create compelling soundtracks for each of your videos, while its Denoise feature helps you reduce background noise in audio files. Converting an MP4 to MP3 in Filmora is a quick process that won’t take much longer than a couple of minutes. Here’s how you can convert an MP4 to MP3 with Filmora.

After you’ve created a new project, you should head over to the editor’s Media Panel to import the MP4 video file you’d like to turn into an MP3 audio file. The file you imported into a project in Filmora will be displayed in the Media Panel and you should simply drag and drop it to the timeline. After you’ve placed the MP4 file to the video track on the timeline, you should click on the Export button.

The Export window will appear on the screen and you just have to select MP3 as the preferred output format and click on the Export button. The rendering process will start immediately, but its duration depends on the size and the quality settings you’ve chosen. Filmora lets you create high-quality MP3 audio files from MP4 video files which makes it a great choice for a broad range of users.

Pros

Doesn’t watermark the MP3 files even if you’re using the free version of the software
Quick and easy MP4 to the MP3 conversion process

Cons

Doesn’t offer the batch conversion option.

2. Converting MP4 to MP3 Files With Windows Media Player For Free

All recent versions of the Windows OS come bundled with the Windows Media Player that lets you play both video and audio files. In order to start converting MP4 to MP3 files you must first open the MP4 file with Windows Media Player, so just click on the File drop-down menu, choose the Open option and select the MP4 file you’d like to open. The video filed you opened will start playing and you have to click on the Menu button to access the player’s home screen.

Once the home screen loads, you should click on the Organize drop-down menu that is located in the upper left corner of the screen and select Options. Click on the Rip Music tab in the Options window that appeared on the screen and then use the Change icon to select the destination on your hard drive where the converted file is going to be saved.

Directly below you will be able to see the Rip Settings section of the tab, click on the Format drop-down menu and select the MP3 option. Hit the OK button to commence the conversion process, and wait for your MP4 file to be converted into an MP3 file.

Pros

All Windows users can convert MP4 to MP3 files for free

Cons

No control over the quality of the output file
Rip Music tab isn’t easily accessible

3. Using the iTunes Library to Convert MP4 to MP3 Files

iTunes is probably one of the best media players ever created so it is hardly a surprise that you can use it as an MP4 to MP3 converter. You just have to add an MP4 file you’d like to convert into an MP3 to iTunes Library by clicking on the File menu and selecting Add File to Library option. Browse the computer’s hard drive until you find the file you want to add to the library and click OK to complete the process.

The MP4 file will be placed in the iTunes’ Music category, and you just have to click on it to select it. Head back to the File menu and choose the Create MP3 Version option from the Convert submenu. The conversion process will commence immediately and once it is completed you can play your freshly created MP3 file directly from iTunes.

Pros

iTunes makes it easy to organize MP3 files
The speedy file conversion process

Cons

Converting large quantities of MP4 files to MP3 can be time-consuming

4. Converting MP4 to MP3 Files on Windows, macOS, and Linux with VLC Player

VLC is an open-source player that enables you to play a broad range of audio and video files. It also offers some video editing and file conversion functionality that allows its users to apply effects and filters or change the format of audio and video files.

Go to the Media menu and click on the Convert/Save option or use the Ctrl+R keyboard shortcut to bring up the Open Media window. Under File Selection, click on the Add icon and proceed to choose the MP4 file you want to convert. At the bottom of this window, you’ll be able to see the Convert/Save button, click on it and wait for the Convert window to appear on the screen. Expand the Profile drop-down menu that is located under Settings, change the output file format to MP3 and then click on the Browse icon next to Destination File to specify the destination where the new audio file is going to be saved. Click on the Start button and wait for the conversion process to be completed.

Pros

A reliable method of converting MP4 to MP3 regardless of the OS you’re using
MP4 to MP3 conversion can be completed in just a few steps

Cons

Produces low-quality MP3 files

You may also like: How to Change Video Format [Free Tutorial] >>

Best Free Online MP4 to MP3 Converters

Besides using MP4 to MP3 converters for Mac and PC computers, you can also try converting MP4 to MP3 with web-based tools. Let’s take a look at some of the best online MP4 to MP3 converters you can use for free.

1. Online Audio Converter

Online Audio Converter lets you convert more than 300 different file formats into MP3, WAV, Ogg and other audio file formats in just three easy steps. Simply upload a file, set the output format to MP3 and adjust the Quality settings. Optionally, you can click on the Advanced Settings button if you want to apply fade-in and fadeout effects, alter the Bitrate and Sample Rate or specify the number of channels. The platform also lets you edit the track info so you can add the name of the artist or the title of a song. In addition, you can also use the batch conversion option if you want to convert multiple MP4 files to MP3 at the same time. Click on the Convert button when ready to complete the file conversion process.

Pros

Batch conversion features are available
Users have complete control over the quality of the output file

Cons

Uploading large MP4 files can take a while

2. Convertio

There is nothing complicated about converting MP4 to MP3 with this online platform. You can just upload an MP4 file from your computer, Dropbox or Google Drive and hit the convert button. The lite version of Convertio doesn’t let you upload files larger than 500MB and it allows you to make 25 concurrent conversions. Uploading MP4 files up to 1GB requires you to purchase the Basic subscription plan, but you can also use the Convertio platform for free if you are not planning on using it frequently to convert MP4 to MP3 files.

Pros

Simple and efficient MP4 to MP3 converter

Cons

Choosing a subscription is necessary if you want to convert files larger than 500MB

3. Zamzar

Zamzar is a powerful file converter that lets you convert MP4 files to a broad range of audio and image file formats. The best part is that you can complete the file conversion process effortlessly. Upload a file, select the output file format and click on the Convert Now button. However, before you can start converting MP4 to MP3 you will have to agree to the platform’s terms and conditions. The maximum size of an MP4 file, you can convert to MP3 or any other file format with the free version of the platform can’t exceed 150MB.

Pros

Huge selection of different output formats

Cons

Even the pro version of Zamzar doesn’t allow you to upload files larger than 400MB

You may also like:

Free YouTube to MP3 Downloader for Android>>

Tools to Convert YouTube to MP3 for Your iPhone>>

Conclusion

You don’t have to be a seasoned video editing professional to convert an MP4 file to MP3 because there are so many online and computer MP4 to MP3 converters that enable you to complete this task in just a few clicks. What is your favorite MP4 to MP3 file converter? Leave a comment and let us know.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Best Mac and PC-based MP4 to MP3 Converters

1. Using Filmora to Convert MP4 to MP3 Files

Pros

Doesn’t watermark the MP3 files even if you’re using the free version of the software
Quick and easy MP4 to the MP3 conversion process

Cons

Doesn’t offer the batch conversion option.

2. Converting MP4 to MP3 Files With Windows Media Player For Free

Pros

All Windows users can convert MP4 to MP3 files for free

Cons

No control over the quality of the output file
Rip Music tab isn’t easily accessible

3. Using the iTunes Library to Convert MP4 to MP3 Files

Pros

iTunes makes it easy to organize MP3 files
The speedy file conversion process

Cons

Converting large quantities of MP4 files to MP3 can be time-consuming

4. Converting MP4 to MP3 Files on Windows, macOS, and Linux with VLC Player

Pros

A reliable method of converting MP4 to MP3 regardless of the OS you’re using
MP4 to MP3 conversion can be completed in just a few steps

Cons

Produces low-quality MP3 files

You may also like: How to Change Video Format [Free Tutorial] >>

Best Free Online MP4 to MP3 Converters

1. Online Audio Converter

Pros

Batch conversion features are available
Users have complete control over the quality of the output file

Cons

Uploading large MP4 files can take a while

2. Convertio

Pros

Simple and efficient MP4 to MP3 converter

Cons

Choosing a subscription is necessary if you want to convert files larger than 500MB

3. Zamzar

Pros

Huge selection of different output formats

Cons

Even the pro version of Zamzar doesn’t allow you to upload files larger than 400MB

You may also like:

Free YouTube to MP3 Downloader for Android>>

Tools to Convert YouTube to MP3 for Your iPhone>>

Conclusion

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Best Mac and PC-based MP4 to MP3 Converters

1. Using Filmora to Convert MP4 to MP3 Files

Pros

Doesn’t watermark the MP3 files even if you’re using the free version of the software
Quick and easy MP4 to the MP3 conversion process

Cons

Doesn’t offer the batch conversion option.

2. Converting MP4 to MP3 Files With Windows Media Player For Free

Pros

All Windows users can convert MP4 to MP3 files for free

Cons

No control over the quality of the output file
Rip Music tab isn’t easily accessible

3. Using the iTunes Library to Convert MP4 to MP3 Files

Pros

iTunes makes it easy to organize MP3 files
The speedy file conversion process

Cons

Converting large quantities of MP4 files to MP3 can be time-consuming

4. Converting MP4 to MP3 Files on Windows, macOS, and Linux with VLC Player

Pros

A reliable method of converting MP4 to MP3 regardless of the OS you’re using
MP4 to MP3 conversion can be completed in just a few steps

Cons

Produces low-quality MP3 files

You may also like: How to Change Video Format [Free Tutorial] >>

Best Free Online MP4 to MP3 Converters

1. Online Audio Converter

Pros

Batch conversion features are available
Users have complete control over the quality of the output file

Cons

Uploading large MP4 files can take a while

2. Convertio

Pros

Simple and efficient MP4 to MP3 converter

Cons

Choosing a subscription is necessary if you want to convert files larger than 500MB

3. Zamzar

Pros

Huge selection of different output formats

Cons

Even the pro version of Zamzar doesn’t allow you to upload files larger than 400MB

You may also like:

Free YouTube to MP3 Downloader for Android>>

Tools to Convert YouTube to MP3 for Your iPhone>>

Conclusion

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Best Mac and PC-based MP4 to MP3 Converters

1. Using Filmora to Convert MP4 to MP3 Files

Pros

Doesn’t watermark the MP3 files even if you’re using the free version of the software
Quick and easy MP4 to the MP3 conversion process

Cons

Doesn’t offer the batch conversion option.

2. Converting MP4 to MP3 Files With Windows Media Player For Free

Pros

All Windows users can convert MP4 to MP3 files for free

Cons

No control over the quality of the output file
Rip Music tab isn’t easily accessible

3. Using the iTunes Library to Convert MP4 to MP3 Files

Pros

iTunes makes it easy to organize MP3 files
The speedy file conversion process

Cons

Converting large quantities of MP4 files to MP3 can be time-consuming

4. Converting MP4 to MP3 Files on Windows, macOS, and Linux with VLC Player

Pros

A reliable method of converting MP4 to MP3 regardless of the OS you’re using
MP4 to MP3 conversion can be completed in just a few steps

Cons

Produces low-quality MP3 files

You may also like: How to Change Video Format [Free Tutorial] >>

Best Free Online MP4 to MP3 Converters

1. Online Audio Converter

Pros

Batch conversion features are available
Users have complete control over the quality of the output file

Cons

Uploading large MP4 files can take a while

2. Convertio

Pros

Simple and efficient MP4 to MP3 converter

Cons

Choosing a subscription is necessary if you want to convert files larger than 500MB

3. Zamzar

Pros

Huge selection of different output formats

Cons

Even the pro version of Zamzar doesn’t allow you to upload files larger than 400MB

You may also like:

Free YouTube to MP3 Downloader for Android>>

Tools to Convert YouTube to MP3 for Your iPhone>>

Conclusion

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ai Video Tools

New Mastering Audio-Video Sync in FCPX 2024 Tips and Tricks

Mastering Audio-Video Sync in FCPX 2024: Tips and Tricks

Practical Guide: How to Sync Audio and Video in Final Cut Pro X 2024

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Shanoon Cox

Part 1: How to Fix Audio and Video Sync Issue?

Part 2: How to Auto-sync in Final Cut Pro X?

Part 3: How to Match Audio and Video Manually in Final Cut Pro X?

Part 4: Fast Ways to Sync Multicam in Final Cut Pro X

Cut, Merge, Repeat: The 5 Best Free Online Video Merging Tools You Should Know

Top 6 Free Online Video Mergers

Ollie Mattison

The Best Free Online Video Mergers in 2022

1. Merge Video

3. Aconvert

4. Kapwing

5. Cellsea

6. FlexClip

For Better Experience

Ollie Mattison

The Best Free Online Video Mergers in 2022

1. Merge Video

3. Aconvert

4. Kapwing

5. Cellsea

6. FlexClip

For Better Experience

Ollie Mattison

The Best Free Online Video Mergers in 2022

1. Merge Video

3. Aconvert

4. Kapwing

5. Cellsea

6. FlexClip

For Better Experience

Ollie Mattison

The Best Free Online Video Mergers in 2022

1. Merge Video

3. Aconvert

4. Kapwing

5. Cellsea

6. FlexClip

For Better Experience

Streamline Your Workflow: Top Adobe Premiere Shortcuts

Top 20 Adobe Premiere Shortcuts You Will Use When Editing Video Files

Benjamin Arango

1Select Window

2 Import

3Capture Panel

4 Timeline Panel

5 Navigation within a clip

6Marking Clips

7 In and Out

8Playing Clips

9Toggle Audio During Scrubbing

10Slide a clip within the sequence

11Slip within a sequence

12Nudging

13Multi Camera Selection

14Add an edit

15Add the default Transition

16 Match Frame

17Zoom to sequence

18Jump to Edit

19Toggle the type of Trim used